thermal cutter, hot knife ,heating cutter, heating knife, heating trimmer for eva pvb sgp lamination
Peter Lin, [email protected],
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www_cncGlass_com www_cncEVA_com
The CNC THERMAL CUTTER the same as GTS thermal cutter is a thermal cutting tool for cleaning the edges of laminated glass by trimming the interlayer film that may have overflowed during the lamination process. The blade heats up to 500°C in seconds and uses heat to easily cut through any interlayer film including EVA, PVB or SGP. The cutter is supplied with four interchangeable blades for different cutting applications.
Peter Lin, [email protected],
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www_cncGlass_com www_cncEVA_com
Edges Cleaning hot knife for SGP PVB laminated safety glass
Hand operated tool for cutting small quantities, for short-time operation only.
To cut and seal synthetic fiber products, such as ropes, bands, belts and fabric.
Fitted with cutting foot, the combined tool is especially effective for cutting
synthetic fabric without cutting surface.
Controlling heating by switching the toll on and off
Peter Lin, [email protected],
Whatsapp: 0086 15013829504,
WeChat: WeCan365
Hot Knife Electric Rope Cutter Cautions
Always operate the Hot Knife in well ventilated space.
Never burn off the excess residue on the Hot Knife blade. The blades will over heated and be warped.
Only operate Hot Knife when it is in contact with the insulation board
Keep hot blades away from skin, clothing and other flammable materials.
Allow blades to cool before handling. Hot Knife may cause injury or burns to exposed surfaces.
If the temperature inside the tool is too high, the unit will get hot and the internal thermal protectors will turn it off, after it cool, the Hot Knife will operate again.